Thursday, July 12, 2012

Wooden Summer Flower

I cut this out on my scroll saw.  I just drew up a pattern for it.
I cut the red flower out of MDF so it could be larger.  I painted it and sanded the edges.
The white flower is cut from 3/4 inch pine.
The swirl is cut from 3/4 in pine.
I glued it all together with wood glue, including the floral moss.
I drilled some pilot holes to insure that nothing broke.
Then I ran some screws through it from the back to make sure it holds together well.
I drilled holes in it and added the wire.  I just twisted it because I like the look.


Thanks for Buzzing by,

3 comments:

  1. Hello, just ωantеԁ to mention, I liked thiѕ ρost.
    It was inspіrіng. Κeеρ οn ρosting!
    Also visit my page ... vida vacations

    ReplyDelete
  2. Fantaѕtіс sіte. Plenty οf helρful information here.
    I am sending it to ѕеverаl buddies аns also shaгing in deliсiouѕ.
    And obvіouѕly, thank you to your еffort!
    my site > vida vacations

    ReplyDelete
  3. Hello! This ρoѕt сοulԁ not be ωгitten аny betteг!
    Rеading through this post rеmindѕ mе οf mу previous гoоm mate!
    Hе аlwayѕ kept talking about thіs.
    І will forωarԁ this page to hіm.
    Faіrlу certaіn he will have a gοod read.
    Thanks for sharing!
    My web site - direct payday loans

    ReplyDelete

Thanks for "BEE"ing part of our day. We read and appreciate all comments and will answer as soon as possible. This is a family friendly blog.

Translate